- info@bradyroofing.com
- + (801) 487-5151
- 2729 Andrew Ave. Salt Lake City, UT 84104
Custom Panels, Expert Install
Looking for a reliable metal roofing contractor in Salt Lake City? Brady Roofing fabricates nearly all metal panels on-site, which means every system is cut to the exact dimensions of your roof before installation begins. We specialize in metal roof installation, repair, standing seam roofing, and custom metal systems built for Utah’s climate. Whether you need a new roof, a replacement, or repair work on an existing metal system, our crews deliver durable, long-term solutions designed to handle snow, wind, and extreme temperature swings.
Brady Roofing installs and repairs metal panel roofing systems for residential, commercial, and agricultural properties across Utah. Every project starts with on-site panel fabrication at our Salt Lake City facility, allowing us to cut each panel to the exact dimensions of your roof. The result is a tighter fit, less material waste, and a faster installation process compared to pre-fabricated systems.
Metal roofing is one of the most durable long-term solutions available for Utah properties. Panels resist hail damage, hold up under heavy snow loads, shed ice efficiently, and reflect solar heat to reduce cooling costs in the summer. Whether you are upgrading a home in Draper, replacing a commercial roof in Salt Lake City, or putting a new roof on an agricultural structure in the Wasatch Back, Brady Roofing handles the full scope of work.
Not every metal roof needs to be replaced. Brady Roofing offers expert metal roof repair services to address common issues like loose fasteners, panel damage, flashing failures, and leaks.
If your metal roof was installed by another contractor or is starting to show signs of wear, our team can inspect the system and recommend the most cost-effective solution. We focus on extending the life of your roof while maintaining performance and protection.
Standing seam is the premium metal roofing system and the one Brady Roofing recommends for homeowners and commercial buildings where long-term performance and aesthetics are priorities. Unlike exposed fastener panels, standing seam systems use concealed clips and continuous vertical ribs, so no fastener penetrates the panel surface. That design eliminates the most common source of metal roof leaks and gives the roof a clean, architectural appearance.
Brady Roofing fabricates standing seam panels on-site, custom cut to your roof’s exact dimensions. That precision eliminates panel gaps, reduces waste, and speeds up installation. Standing seam systems are a popular choice for Park City and Wasatch Front homes where design standards are high and roof performance in heavy snow conditions is critical.
Metal roofing costs in Utah depend on several factors: roof size and pitch, panel system type (standing seam vs. exposed fastener), whether an existing roof needs to be torn off, and job complexity. On-site fabrication which Brady Roofing provides for most projects adds precision without adding significant cost, because it eliminates the waste and fit issues that come with pre-cut panels.
Brady Roofing provides free estimates and detailed inspections so you can understand your options before committing to anything. Financing is available through Mountain America Credit Union for qualified homeowners.
Metal roofing is built to handle Utah’s demanding climate. From heavy snow loads in winter to intense UV exposure at elevation during summer, metal panels deliver year-round protection that outlasts traditional roofing materials. Brady Roofing installs metal roofing systems for residential, commercial, and agricultural properties across Salt Lake City, Sandy, Cottonwood Heights, Highland, Alpine, Park City, and surrounding communities — each one custom-fabricated on-site for a precise fit.
Utah homeowners turn to metal roofing because it addresses the specific challenges of living along the Wasatch Front. Metal panels resist damage from hail, shed heavy snow efficiently, and stand up to high winds without the blow-off risk common with traditional shingles. Metal is also fire-resistant, which adds a layer of protection for properties near foothill areas. And because metal reflects solar heat rather than absorbing it, homeowners often see improved energy efficiency in both summer and winter months.
Brady Roofing has been a trusted Salt Lake City roofing contractor since 1996, with over 1,250 clients served and certified installation crews trained to follow strict manufacturer standards on every project.
Asphalt shingles are the most common roofing material in Utah, but they were not designed for the demands of Wasatch Front weather. Heavy snow loads, freeze-thaw cycles, summer UV exposure at elevation, and hail events shorten shingle lifespans and drive up long-term maintenance costs. Metal roofing addresses each of these problems directly.
Asphalt shingle roofs typically last 20-30 years in Utah depending on materials and climate exposure. Professionally installed metal roofs are known across the industry for significantly longer lifespans, often lasting 40–70 years with proper installation.
Asphalt shingles can be vulnerable to wind blow-offs, granule loss, and storm damage. Metal roofing systems resist high winds, hail, heavy snow, and fire.
Shingle roofs require periodic inspections for cracking, curling, and missing tabs. Metal roofs are low-maintenance by comparison, though they should still be inspected for fastener back-outs or flashing issues over time.
Metal roofing reflects solar heat, which can reduce cooling costs in Utah’s hot summers. Asphalt shingles absorb more heat, which can increase attic temperatures.
Both options offer a wide range of colors and styles. Metal roofing provides a clean, modern look, while shingles offer a more traditional appearance with strong design flexibility.
Asphalt shingles are more affordable upfront, making them one of the most popular roofing options in Salt Lake City. Metal roofing has a higher initial investment but delivers greater long-term value due to its extended lifespan, lower maintenance needs, and energy savings.
Brady Roofing serves residential and commercial properties across the Wasatch Front and surrounding communities. Every metal roof we install is fabricated on-site in Salt Lake City and installed by our own crews, not subcontractors.
We serve: Salt Lake City, Sandy, Draper, West Jordan, South Jordan, Riverton, Herriman, Millcreek, Holladay, Murray, Cottonwood Heights, Highland, Alpine, Park City, Heber City, Kamas, and surrounding areas. If you’re looking for a metal roofing contractor near you, we’re ready to help.
Metal roofing in Utah typically costs between $9 and $18 per square foot installed, depending on the panel profile, roof pitch, complexity, and whether an existing roof needs to be removed first. Standing seam systems run toward the higher end of that range. Exposed fastener panels and agricultural systems are more affordable.
The upfront cost is higher than that of asphalt shingles, but metal roofing lasts two to three times longer and requires significantly less maintenance over its lifetime. For most Utah homeowners, the long-term math favors metal roofing when they plan to stay in the home for more than 10 years.
Brady Roofing provides free on-site estimates with detailed written scopes so you can compare your options and budget accurately. Financing is available through Mountain America Credit Union for qualified homeowners.
Brady Roofing installs metal panel roofing systems for residential and commercial properties, including standing seam, exposed fastener panels, and custom metal systems fabricated on-site in Salt Lake City. We work with a range of materials and panel profiles depending on your roof’s requirements and design goals.
A professionally installed metal roof in Utah typically lasts 40 to 70 years. Metal panels resist the damage that shortens asphalt shingle lifespans along the Wasatch Front: heavy snow loads, hail, wide temperature swings, and high UV exposure at elevation. Asphalt shingles in the same climate generally last 18 to 25 years.
For most Utah properties, yes. The higher upfront cost is offset by a lifespan two to three times longer than asphalt shingles, lower long-term maintenance, and energy savings from solar heat reflectance. Properties near foothill areas also benefit from the fire resistance of metal panels.
Yes. Brady Roofing repairs metal roofs installed by any contractor. Common repairs include fastener back-outs, panel seam failures, flashing issues, and underlayment problems. We inspect the system and provide a written estimate before any work begins.
Yes. Brady Roofing offers financing through Mountain America Credit Union for qualified homeowners. Ask about your financing options when you schedule your free estimate.
Standing seam metal roofing uses concealed fastener panels with continuous vertical ribs that run from ridge to eave. Because no fastener penetrates the panel surface, standing seam systems eliminate the most common cause of metal roof leaks. They are the premium option for Utah homeowners and commercial buildings where long-term performance and clean aesthetics are priorities. Brady Roofing fabricates standing seam panels on-site in Salt Lake City for a precise, custom fit on every project.
Serving Salt Lake City Since 1996 · 1,250+ Clients Served · Licensed & Insured · Certified by Every Manufacturer We Install · 5-Year Workmanship Warranty · Financing Available Through Mountain America Credit Union
Get expert guidance on your metal roof installation or repair. Contact Brady Roofing in Salt Lake City for a free, no-obligation estimate. Financing available through Mountain America Credit Union for qualified homeowners.
“Brady Roofing is a very reputable roofing contractor. Stewart is extremely knowledgeable and professional. We will definitely use them again.”